TOSIZE.de
Do it yourself
DIY Projects
Do it yourself: Renew/replace shutters with plywood, by Raymond

Do it yourself: Renew/replace shutters with plywood, by Raymond

Related projects

Create DIY projects in a breeze!

Easy as a kit at home.

Start designing

New!

Check out our new shelf cabinets 3D configurator

Start designing right away

Create this project yourself with sheet material cut to size by TOSIZE.de!

Raymond

Challenging

1 minute

Description of Raymond

Renewing shutters of the workshop. Old shutters were also made by myself 23 years ago. The old shutters really needed replacing. Now opted for 40 mm thick plywood glued waterproof.

How I made this project

Waterproof plywood of 40 mm ordered to size. Pattern determined and milled into the plates using a Metabo router. Pattern was determined by existing wooden door, in which the same pattern is also milled. After milling, the round corners are beautifully finished with a razor-sharp wood chisel. After this, the shutters were sanded with fine sandpaper and some holes filled up here and there. Lightly sanded again and prepared for priming. Primed with Sikkens Onol and then lightly sanded again. Finished with Sikkens Rubbol XD gloss in color. Then mounted the shutters and secured the shutters with shutter holders.