Create this project yourself with sheet material cut to size by TOSIZE.de!

Bas

Average

2 minutes

Description of Bas

A window sill made in the attic under the dormer. The window sill made as narrow as possible because a custom-made table will also be placed on it. The window sill is equipped with insulation and multiple sockets. On the right side an ivar cabinet placed and above that an mdf board so that the window sill continues all the way. Outside the ivar IKEA cabinet on the right side also placed a socket. Window sill painted several times so that it is well covered.

How I made this project

-frame built on the basis of wooden beams. The wooden beams are also screwed into the floor - electrical cable looped through at the points where sockets should come. - the custom-made mdf panels are attached to the frame - saw sockets with a wood drill and insert/connect the sockets. Only the frames were not yet done because painting was still being done -ivar cupboard is hung and the mdf panel is made on top of it - fill holes with mdf filler - clean mdf with mdf cloths and lightly sand filled holes - prime twice (mdf primer) and finish twice.